data storage solutions  
  x1009 - PCIe to 5-port SATA Shield  
     
 
  Home    
KVM over IP Switches Raspberry Pi Boards / Kits Jetson Boards / Kits Point-of-sale(POS) Hardware
  Be Our Distributor      Custom Products      OEM/ODM      What We Do      Contact		  
     
 
       hardware overview   hardware   software  
     
 
       required hardware  
 
   1   

X1009 PCIe to 5-port SATA shield

    2   

Raspberry Pi 5 Model B

  
   3   

micro-SD card (≥16GB) x1

    4   

7-pin SATA data cable x5 (not included in the X1009 kit)

  
  5   Power adapter 12Vdc output, plug size 5.5x2.1mm          
     

Required output current:

≥3A if your SATA drives are powered from a separate PSU
≥5A for two 3.5" HDDs, ≥7A for three 3.5" HDDs, ≥9A for four 3.5" HDDs, ≥11A for five 3.5" HDDs
≥4A for two 2.5" HDDs, ≥5A for three 2.5" HDDs, ≥6A for four 2.5" HDDs, ≥7A for five 2.5" HDDs

  
     
  *Don't power the X1009 via DC powe jack and the Raspberry Pi5 via USB-C at the same time.  
 
 
       hardware installation  
 
     
     
     
     
     

 
   
   
© 2024 SupTronics Technologies Limited, All Rights Reserved.