|
|
|
|
X20-DAC BOARD |
|
|
|
|
- |
ESS Technology flagship DAC chipset
(ES9028Q2M) for best sound quality |
|
- |
129dB DNR -120dB THD+N |
|
- |
32bit/384kHz Bit to Bit Playback & Native
DSD Playback (Use with our XMOS I2S module) |
|
- |
JRC MUSES8920 high quality Audio J-FET
input dual OP AMP |
|
- |
Ultralow phase noise 100MHz HiFi
TCXO |
|
- |
Texas Instruments ultra-low-noise
voltage regulator |
|
- |
Dedicated individual DVCC, AVCCL, AVCCR,
Oscillator 3.3V power supply |
|
- |
Selected high quality components (WIMA Film capacitor, Panasonic low ESR aluminum
electrolytic capacitor,
Gold-plated RCA connectors etc) |
|
- |
Can connect to our XMOS USB-to-I2S module
directly |
|
- |
Can be used individually with only 3 wire
I2S signal connected from other i2s
interface |
|
- |
All dual OPAMP in single dip8 package IC can
be used |
|
- |
High performance and compact Raspberry
Pi DAC solution for everyone |
|
|
|
|
|
Specification |
|
- |
Power supply: +5Vdc ±5%,
+15Vdc ±5%, -15Vdc
±5% |
|
- |
Analog audio output level: 2V RMS |
|
- |
Resolution/Sampling Rate: Up to 24bit / 192KHz (Raspberry Pi I2S) |
|
|
Up to 32bit / 384KHz (Use
with XMOS USB to I2S board) |
|
|
DSD64 /DSD128 (Use with XMOS USB to I2S
board) |
|
|
PCBA size : 101.5 x 56mm x 34.5mm, PCB size
: 85 x 56mm |
|
|
|
|
X10-PWR POWER SUPPLY BOARD |
|
|
|
|
- |
Fully regulated linear power supply board
for X10 / X20 series DAC |
|
- |
Texas Instruments ultralow noise TPS7A470x regulator |
|
- |
Four individual 5.2V/ 5.0V/-15V/+15V to
power the Raspberry Pi
(1), DAC chipset and OPA |
|
- |
High performance ELNA and Nichicon Audio
Purpose Capacitors |
|
- |
For use with R-core transformer |
|
|
|
|
|
Specification |
|
- |
Input rating : 6VAC ±5%
2.5A, 6VAC ±5%
0.5A, 15VAC ±5%
0.55A, 15VAC ±5%
0.55A |
|
- |
Output voltage：5Vdc ±5%
2.5A, 5Vdc ±5%
0.5A, +15Vdc ±5%
0.5A, -15Vdc ±5%
0.5A, |
|
- |
PCBA size : 85mm x 56mm x 50.5mm, PCB size :
85 x 56mm |
|
|
|
|
|
Notes (1) :
Low voltage indicator might show up
during boot, it does not affect audio
performance. |
|
|
WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's
MICRO USB SOCKET. |
|
|
|
|
X10-RTR R-CORE TRANSFERMER |
|
|
|
|
- |
For use with X10-PWR power supply board |
|
- |
High quality 35W R-core transformer |
|
- |
Equipped with AC voltage selector switch
convenient to select 115/230Vac input |
|
- |
Lighted power switch |
|
- |
Equipped with detachable power cord |
|
- |
Full aluminum chassis |
|
|
|
|
|
Specification |
|
- |
Input : AC110 / 230V ~50 / 60Hz |
|
- |
Output： 6VAC ±5%
2.5A, 6VAC ±5%
0.5A, 15VAC ±5%
0.55A, 15VAC ±5%
0.55A |
|
- |
Size 118m x 93mm x 59mm |
|
|
|
|
X10-I2S
V2.0 BOARD SA9227A USB TO
I2S / SPDIF / Coaxial |
|
- |
High performance USB High-Speed compliant
audio steaming controller - SA9227A |
|
- |
Deliver precise output with low
noise/distortion for soothing, high-quality
sound |
|
- |
Ideal HiFi audio solution for Raspberry Pi |
|
- |
Streamed through Raspberry Pi to I2S, DSD
and/or S/PDIF interfaces |
|
- |
PCM up to 32bit /384 KHz sample rates |
|
- |
Native DSD, DoP64 and DoP128 |
|
- |
Up to 192 kHz, 16/24 bit resolution S/PDIF
output |
|
- |
Asynchronous Isochronous transfer from
Raspberry Pi |
|
- |
Multiple OS support (Volumio, Moode Audio
Player, Windows, Android etc) |
|
- |
SiTime SiT8208 ultra performance oscillator |
|
- |
Texas Instruments ultra-low-noise
voltage regulator |
|
|
|
|
|
Specification |
|
- |
Power supply: +5Vdc +/-5% |
|
- |
CODEC: I2S 16, 24, or 32 bit PCM, DSD64,
DSD128, DSD256 |
|
- |
PCM sample rates : 44.1, 48, 88.2, 96,
176.4, 192, 352.8, 384KHz |
|
- |
Optional S/PDIF output : Up to 192 KHz;
16/24 bit resolution |
|
- |
PCBA size : 101.5 x 56mm x 34.5mm, PCB size
: 85 x 56mm |
|
|
|
|
X10-I2S
V1.2 BOARD XMOS USB TO
I2S / SPDIF / Coaxial |
|
|
|
|
- |
The XMOS xCORE-AUDIO Hi-Res family of parts |
|
- |
Deliver precise output with low
noise/distortion for soothing, high-quality
sound |
|
- |
Ideal HiFi audio solution for Raspberry Pi |
|
- |
Streamed through Raspberry Pi to I2S, DSD
and/or S/PDIF interfaces |
|
- |
PCM up to 32bit /384 KHz sample rates |
|
- |
Native DSD, DoP64 and DoP128 |
|
- |
Up to 192 kHz, 16/24 bit resolution S/PDIF
output |
|
- |
Asynchronous Isochronous transfer from
Raspberry Pi |
|
- |
Multiple OS support (Volumio, Moode Audio
Player, Windows, Android etc) |
|
- |
SiTime SiT8208 ultra performance oscillator |
|
- |
Texas Instruments ultra-low-noise
voltage regulator |
|
|
|
|
|
Specification |
|
- |
Power supply: +5Vdc +/-5% |
|
- |
CODEC: I2S 16, 24, or 32 bit PCM, DSD64 and
DSD128 |
|
- |
PCM sample rates : 44.1, 48, 88.2, 96,
176.4, 192, 352.8, 384KHz |
|
- |
Optional S/PDIF output : Up to 192 KHz;
16/24 bit resolution |
|
- |
PCBA size : 101.5 x 56mm x 34.5mm, PCB size
: 85 x 56mm |
|
|
|
|
X10-HPAMP HiFi Headphone Amplifier
(Optional Accessories) |
|
|
|
|
- |
Uses TI TPA6120A2 as headphone chip |
|
- |
SNR of 128dB
A-Weighted and THD of 112.5dB |
|
- |
Current-Feedback Architecture |
|
- |
The best class AB high fidelity headphone
amplifier for diyer to enjoy |
|
- |
Original ALPS RK27 potentiometer |
|
- |
0.1% low noise thin film resister |
|
- |
6.35mm and 3.5mm earphone output jack |
|
|
|
|
|
Specification |
|
- |
Power supply: +15Vdc ±5%, -15Vdc
±5% |
|
- |
Output power: 150MW /250, 300MW /120, 1000MW
/32 |
|
- |
Frequency response: 20hz-30khz |
|
- |
PCBA size : 124mm x 56mm x 37.5mm, PCB size
: 85 x 56mm |
|
|
|
