Home     All DIY Kits     All Expansion Boards     Accessories     Web Store     OEM/ODM     Contact
	X6000K-8.0CH Expansion Board	Hardware installation		Software Configuration
	Product Overview
	For Use With - Raspberry Pi B+/2/3 Operating System - OSMC - 8-channel  L/R audio outputs - Moode Audio Player - 8-channel L/R audio outputs - Raspbian Jessie - 8-channel L/R audio outputs - Openelec - 8-channel L/R audio outputs - Rune audio - 8-channel L/R audio outputs - Pi Core Player - To be tested     Key Features     - Ultra-compact chassis - Ideal for car audio entertainment   Ideal for stage audio systems - Ideal for multi-channel audio systems - 8-channel stereo audio outputs at the same time even if playing 2-channel audio - Used four ESS Tech Sabre premier stereo DACs ES9023 - ES9023 delivers jitter-free studio quality audio with 112dB DNR - Each DAC has independent ultra-low-jitter clock generator - Used the Texas Instruments ultra-low-noise voltage regulator - Supports up to 1TB 2.5-inch SATA hard drives - High quality video performance - Supports SPDIF Optical Digital Audio - Supports HDMI high-bit-rate (HBR) audio - 4 analog stereo 3.5mm jack outputs - Selected high quality components (Solid Capacitors, Murata MLCC etc) - Allows you to split the audio stream from a HDMI signal - No HDMI output connection is required to receive audio at the analog and optical outputs - Connects directly to the Raspberry Pi - no additional cables needed - Powers the Raspberry Pi - no additional power supply - Lighted power switch - Raspberry Pi status LEDs still visible - Access to Raspberry Pi GPIO - Easy to change the Raspberry Pi OS SD card - No need to open the case - Easy DIY with Raspberry Pi     Power Supply Unit (Optional Accessories) - AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output - With 2 snap-in plugs for North America (US) and Europe (EU) - DC Power Plug Size : 5.5*2.5mm Specification     - Power supply: +5Vdc +/-5% - Input Ports: 1 x HDMI - Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack - Analog audio output level: 2V RMS - Optical S/PDIF Audio Sampling Rate: Up to 192 kHz - HDMI Audio Format: LPCM 8.0CH - Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH - Size 122mm x 90mm x 90mm     Notes     - For use with original power supply unit only - WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.  - Approx 3 seconds delay to turn on Raspberry Pi after power applied. (The powerful HDMI audio processing chipset needs time to bootup)
	Packing List
	- X6000-8.0CH Expansion board x 1   - HDMI bridge x 1   - Spacer M2.5 x 20mm x 1   - Screw M2.5 x 6mm x 1
	Optional Accessories
	Power Supply Unit   - AC 100 - 240V input   - 5Vdc 4A output - W/ EU and US plug - 5.5*2.5 DC plug - 1.2M cable w/ magnet ring   See details       -   -   -   -   -     See details         -   -   -   -   -     See details         -   -   -   -   -     See details
	© 2017 SUPTRONICS LIMITED, ALL RIGHTS RESEVERED