Home     Products     Web Store       Product Customization       OEM/ODM     Contact  
     
    X705 UPS Board     Hardware
     
 
   
         
   
         
 
    PRODUCT OVERVIEW 
     
 

The X705 is an advanced uninterruptible power supply expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides

5.1V 8000mA Power Backup for even the most demanding Raspberry Pi set ups. The X705 fits snugly on bottom of a Raspberry Pi making the Raspberry Pi mobile by providing a power source for extended period of time.

  
     
  SAFETY INSTRUCTIONS AND WARNINGS
     
 
· You must read these safety instructions and warnings before charging your batteries. 
· Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly. 
· Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-". 
· Do not mix and use old batteries and new batteries, or batteries with different brand names. 
· Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first. 
· When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X705 on the wood material or carpet and unattended. 
· Must keep the X705 away from children. 
 
     
    PRODUCT FEATURES
     
FOR USE WITH
- Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B
OPERATING SYSTEM
- Raspbian
- Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
   

KEY FEATURES
   
- Smart Uninterruptible Power Supply (UPS)
- Provides continuous operations for up to 10hours (depending on battery type used)
- 5.1V 8000mA Power Backup for even the most demanding Raspberry Pi set ups
- 18650 dual Cells Lithium Ion Holder
- Supports 2A via micro-USB socket or 3A via DC jack fast charging
- Can work with single or dual 18650 Lithium Ion battery
- Integrated battery protection circuit
- Integrated over current protection and over voltage protection
- Integrated 10-A fully-integrated synchronous boost converter
- Intelligent automatic charging and discharging
- On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
- On-board red LED show the status of battery charging or fully charged
 
- On-board push button to control power on /off
(Press-ON, Hold the button pressed at least 2s -OFF)
- On-board pin header allows to select auto power-on when power supplied or battery installed
- Ultra-low standby power consumption of μA to maximize battery life
- On-board blue LED shows the status of power on/off
- Powers the Raspberry Pi via the 40-pin header - simple cabling required
- Allows power input via DC jack or Micro-USB socket or XH2.54 connector
- On-board XH2.54 power output connectors allow to power other devices
  On-board XH2.54 power input and output connectors allows to  integrate with your products
   
- Works with all current models of the Raspberry Pi using a 40 pin header
- Mounting holes and standoffs provide mechanical stability of the RPi and X705 assembly
   
Technical
Specification
   
- Power supply via Micro-USB socket : 4.7~5.5Vdc, 2.5A
                              Via DC power jack : 4.7~5.5Vdc ±5%, ≥4A
- UPS output : 5.1V ±5% Max 8A
- UPS charging current: 2A via Micro-USB socket, 3A via DC jack
-

Terminal Battery Voltage : 4.2V
-

Recharge Threshold : 4.1V
   
NOTES
   
- WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB  or Type-C SOCKET. 
-  DO NOT APPLY POWER TO X705 VIA THE  MICRO-USB SOCKET AND DC JACK AT THE SAME TIME. 
-  DO NOT USE  18650 BATTERY WITH BUILT-IN PROTECTION CIRCUIT
   
     
    Box Contents
 
       
- X705 Expansion Board x 1  
- Power daughter board x 1  
- Power connection wire x 1  
- Screw M2.5 *6mm x 8  
- Spacer F/F M2.5 *14mm x 4  
- Spacer M/F M2.5 *22mm x 4  
       
 
     
    Optional Accessories
     
 
     
  Power Supply Unit  
- AC 100 - 240V input  
- 5Vdc 4A output
- W/ EU and US plug
- 5.5*2.5 DC plug
- 1.2M cable w/ magnet ring
  See details  
     
 
     
 
       
 
     
  © 2017 SUPTRONICS LIMITED, ALL RIGHTS RESEVERED