Home     Products     Web Store       Product Customization       OEM/ODM     Contact
	Function Description	X852
	❶ Push a screw (M2.5*6mm) up through the arrowed mounting hole on the underside of X852 and screw down using a F/F spacer (M2.5*12mm)      ❷ a) Insert your mSATA SSD into the mSATA socket. b) Align the notches on the mSATA SSD with the notches in      the mSATA socket, then insert as shown. c) Screw the mSATA drive into place.          ❸ a) Place your Raspberry Pi on top of X852 and screw down     (M2.5*6mm screws) b) Connect the 2-pin power cable from X852 to Raspberry Pi      pin header - Pin 4 (5V, Read wire) and Pin 6 (Ground, Black       wire). c) Insert the USB3.0 jumper   ❹ Optional -To use with X735 power management board a) Unscrew 4 screws on the topside of Raspberry pi b) Screw the M/F spacer (M2.5*12mm) down until it is hand     tight c) Plugs the X735 straight into your Raspberry Pi's GPIO     header and screw down (M2.5*6mm screws) d) Connect the 2-pin power connection wire from the 5V out     connector on X735 to X852 2-pin power socket   Power adapter must be connected to the X735 only , not X822 and Raspberry Pi
	© 2019 SUPTRONICS TECHNOLOGIES LIMITED, ALL RIGHTS RESEVERED