|
|
|
|
|
|
|
| |
| |
The X633
KVM-over-IP switch, built on the Raspberry Pi 4
Model B platform, sets a new standard for remote
management with its full HD performance. It provides
seamless, BIOS-level access to servers, PCs, and
workstations from anywhere at any time, making it
more powerful than any other KVM-over-IP switch.
This ensures you can manage and troubleshoot your
systems effectively, no matter where you are
- ideal for today's remote and distributed
work environments.
The X633 enables you to easily reboot, monitor the
boot process, and interact with your connected
systems. With remote power management, you can
control power on/off, reset, and monitor power and
storage LED activity—all without needing
server-resident software, ensuring your server's
performance and reliability remain unaffected.
Perfect for managing mission-critical systems, the
X633 provides efficient troubleshooting and
restoration of service before downtime can impact
productivity.
|
|
|
 |
| |
|
|
| |
| |
- Built on the Raspberry Pi4
Model B platform
- Full remote BIOS-level control - Access the BIOS
and have full control over the keyboard and mouse
- Supports HDMI input resolutions up to 1920x1080 at
50Hz
- Supports HDMI Pass-Through for
local HDMI display
-
Supports HDMI audio capture
- HDMI Full HD capture based on the TC358743 chip
- OTG Keyboard & mouse; Mass Storage Drive emulation
- 0.96-inch OLED display featuring name, IP address,
temperature, CPU load, and uptime
- Hardware Real-Time Clock (RTC) with CR1220 coin
battery socket
- Compatible with PC, Mac, Linux, and Sun Systems
- Supports ATX control for powering the machine
on/off and resetting it
- PoE Supported – Power over Ethernet for simplified
installation
- Supports powering via USB-C
- Dual HDMI output ports supporting 4K display
- Equipped with a cooling fan to dissipate heat from
the Raspberry Pi CPU
|
|
| |
|
|
| |
| |
|
Power supply |
: |
5Vdc +/-5% , 3A |
|
Ports & Connectors |
: |
Type-C power socket x1 |
|
|
|
HDMI-A video input
connector x1 |
|
|
|
HDMI-A video output
connector for local monitor x1 |
|
|
|
RJ45 port1 - ATX control
x1 |
|
|
|
Type-C OTG socket
(Raspberry Pi 4B) |
|
|
|
Micro HDMI video output
connector x2 (Raspberry Pi 4B) |
|
|
|
10/100/1000M RJ45 Ethernet
jack x1 (Raspberry Pi 4B) |
|
|
|
USB3.0 2-port connector
x1 (Raspberry Pi 4B) |
|
|
|
USB2.0 2-port connector
x1 (Raspberry Pi 4B) |
|
HDMI input resolutions |
: |
Max 1920 x 1080P 50Hz |
|
|
|
|
|
Case Size |
: |
89.5x82x40mm
(LxWxH) |
|
|
| |
|
|
| |
| |
- X633 metal
enclosure x1 |
| |
- X633 IPKVM expansion board x1 |
| |
- X630-A5 ATX control board
with standard PCIe bracket installed x1 |
| |
- X630-A5 Low profile PCIe bracket x1 |
| |
- ATX Ribbon cable 50cm x1 |
| |
- USB-C to USB-A OTG cable x1 |
| |
- Screw
pack x1 |
|
| |
|
|
| |
| |
- The X633 DIY Kit do not come with
a Raspberry Pi 4.
|
| |
- Please use the supplied USB-A to Type-C OTG cable
only. |
|
| |
|
|
