single-port ipkvm switch  
  x632 v1.2  
     
 
  Home       Be Our Distributor      Custom Products      OEM/ODM      What We Do      Contact  
     
 
       hardware overview   hardware   software  
     



 
       Hardware Introduction  
 
  1 System Status LED indiciators  
     
LED name State LED Color Description
PI-PWR Solid on Red    Indicates that 5V power has been provided to the compute module 4 (CM4)
PI-ACT Blink Green    Indicate the CM4 SD card status and program activity
PC-HDD Blink Green    Reads the status of PC HDD LED, indicates data reading /writing
PC-PWR Solid on Red    Reads the status of PC power LED, indicates PC power supply OK
 
         
         
  2 RJ45 connector for ATX control - pin description  
     
Functions Name PIN# PIN# Name Functions
Connect to PC reset switch RESET-SW 1 2 RESET-SW Connect to PC reset switch
Connect to PC HDD LED- HDD LED- 3 4 PWR-SW Connect to PC power switch
Connect to PC power switch PWR-SW 5 6 HDD LED+ Connect to PC HDD LED+
Connect to PC power LED- PWR-LED- 7 8 PWR-LED+ Connect to PC power LED+
 
 
       Hardware connections  
 
 
   1   

Optional for testing and debug - Connect the display for Raspberry Pi HDMI video output using a microHDMI to HDMI cable

     

Locat a USB port on your PC/server and connect to Raspberry Pi OTG connector using the supplied USB-C to USB-A cable

 
   3    Connect to your network using an Ethernet cable      

Locat a HDMI port on your PC/server and connect using a HDMI cable A Male to A Male

 
             
   5    Connect to the X630-A5 ATX control PCI card using an Ethernet cale - Optional, install inside the chassis    6   

Connect the USB-C power supply (DC5V 3A), not required if powering over Ethernet

 
             
 
       Required hardware  
 
   1   

X632 single-port IPKVM switch x1

     

Raspberry Pi 4 Model B x1 (all variants Compatible)

 
   3   

micro-SD card with preloaded IPKVM OS x1

     

CR1220 coin battery x1 (For Real-time clock)

 
   5   

HDMI cable A Male to A Male x1 (For HDMI video input)

     

Ethernet cable x1 (Connect to your network)

 
   7    X630-A5 ATX control PCI card (Optional, To control PC system power, system reset, read status of HDD LED and power LED)    8   

Ethernet cable x1 (Optional, for use with X630-A5)

 
             
                 
       Hardware installation  
 
 
 
 
 
 
 
 
 
 
 
 
   
   
© 2024 SupTronics Technologies Limited, All Rights Reserved.