|
- Built on the Raspberry Pi
Compute Module 4
platform and compatible with all variants
- Control up to 4 USB HDMI computers/servers
remotely over an IP network or the internet
- Full remote BIOS-level control
- Access the BIOS and have full control over the
keyboard and mouse
- Supports four HDMI inputs, four USB inputs and
four RJ45 ports for ATX power control (X630-A5
required)
- Integrated USB hub for peripheral sharing and file
transfer of USB 2.0 devices (backwards compatible
with USB 1.1 and 1.0 devices)
- Supports remote application and
operating system installations, or transferring
files to, or between attached servers
- Supports remote hotkey switching between computers
for easy monitoring
- Supports
switching between hosts in the UI
- Supports direct switching through buttons and
hotkey through keyboard (Keyboard must be connected
to USB 1.1 port)
-
Supports HDMI input resolutions up to 1920x1080 at 60Hz
-
Supports HDMI audio capture
- HDMI Full HD capture based on the TC358743 chip
- 0.96-inch OLED display featuring name, IP address,
temperature, CPU load, and uptime
- Hardware Real-Time Clock (RTC) with CR1220 coin
battery socket
- Compatible with PC, Mac, Linux, and Sun Systems
- Gigabit Ethernet socket supporting Power over
Ethernet (POE) expansion
- Supports HDMI output for software debugging and
settings
- M.2 2280 KEY-M socket for Nvme
SSD storage expansion
- Supports booting from
Micro-SD, CM4 eMMC and faster M.2 2280 NVMe SSD
- Equipped with cooling fan that allows the heat
from your CM4 to dissipate
- Supports powering via DC jack
*Not support Mass Storage Emulation as the integrated USB hub
supports data sharing between 4 target hosts and can also be used
for one of them, which will be available even in BIOS/UEFI when you
need a live disk to revive the OS or even reinstall it.
|
