Home     Products     Web Store       Product Customization       OEM/ODM     Contact               
    X180 7-port stackable  USB3.0 hub     Hardware
    Product Description 
  The perfect stackable 7-port USB3.1 Gen1 hub for the Raspberry Pi4! It extends one USB port on Raspberry Pi4 to 7 usable USB ports, which allows you to connect much more USB devices to your Raspberry Pi. The board size is exactly the same with Pi4 B and can be easily mounted under your Raspberry Pi.

The X180 SuperSpeed USB3.1 hub built in with two USB 3.1 Gen 1 hub Controllers which provides an easy and reliable connection with a transfer speed of up to 5 Gbps, 10x greater than USB2.0 that allows users to add 7 USB3.1 Gen1 ports for your Raspberry Pi 4 easily, backwards compatible with USB2.0 and 1.1.

The hub can be external self-powered or USB bus-powered. For more power hungry devices you can use the DC power jack (5.5*2.5mm) or JST XH2.54 connector on board as an alternative power input port.
      Product Features  
- Raspberry Pi 4 Model B
- All Raspberry Pi operating systems
- The perfect stackable 7-port USB3.1 Gen1 hub for the Raspberry Pi4
- Easy Setup, Plug-and-Play, Without software to install, just install it in and go
- Ultra-fast Data Transfers: Works with USB3.0 and USB2.0 to deliver ultra-fast transfer speeds
- Intelligently Designed for Pi4 , allowing you to use with other Raspberry Pi accessory boards
- It can be easily mounted under your Raspberry Pi
- Stackable design allows you to connect several X180 boards on your Raspberry Pi4 (See notes)
- Function to power the RPi via XH2.54 only needing a single power supply
- External self-powered or USB bus-powered
- Integrated two USB 3.1 Gen 1 Hub Controllers
- Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
- Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
- Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
- Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
- Fully compatible with X725 for uninterruptible power supply (18650 UPS, 5.1V 8A, WOL)
- Power supply: 5Vdc +/-5% , ≥3A
- Ports & Connectors: DC jack - 5.5x2.5mm
                                    USB socket - USB 3.0 type A
                                    Power connector - XH2.54 2-pin 
- PCB Size 85mm x 56mm
- Additional M2.5*20 M/F spacer required for stackable expansion (not supplied with X180).
- For use with original power supply unit only.
- Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C power socket at the same time.
    Box Contents
- X180  HDD expansion board x 1  
- USB3.1 jumper x 1  
- 2-Pin Power Connection Wire x 1  
- Power daughter board x 1  
- Spacer F/F M2.5 x 22mm x 4  
- Spacer M/F M2.5 x 5mm x 4  
- Screw M2.5 x5mm x 8  
    Optional Accessories
  Power Supply Unit  
- AC 100 - 240V input  
- 12Vdc 3A output
- W/ EU and US plug
- 5.5*2.5 DC plug
- 1.2M cable w/ magnet ring
- CE/FCC/UL/GS compliant
  X735 V2.1  
- Smart power management
- Supports safe shutdown
- Supports full poweroff
- Auto-Control cooling fan 
- 40-pin header Reserved
  See details  
- Smart power mgmt board
- Wide 6~36V input range
- 5.1V 5000mA output
- Supports safe shutdown
- Low-noise cooling fan
  See details  
- Smart power mgmt board
- Power on/wake on lan
- 18650 dual Cells Li-Ion UPS
- 5.1V 8A Power Backup
- 2nd 10/100M fast Ethernet
  See details  
- Power over Ethernet board
- IEEE802.3at PoE standard
- 5V/5A 25W DC output
- Isolated switched-mode
- 4 XH2.54 power connectors
  See details