|
|
|
X400
V3.0 EXPANSION BOARD |
- |
Full-HD
audio – up to 24-bit/192kHz playback |
- |
Audiophile TI
Burr Brown 32-bit/384kHz DAC (TI PCM5122) |
- |
Class leading
audio; 112db SNR, and THD of 0.0019% |
- |
Built in High
quality Class-D stereo audio amplifier (TI
TPA3118D2) |
- |
Up to 2×30W
Into a 8-Ω BTL Load at 24Vdc |
- |
Capable of
driving 4 Ohm speakers (also works with higher
impedance speakers) |
- |
Built in
high quality audio
headphone amplifier (TI TPA6133A) |
- |
Uses the
Texas Instruments ultra-low-noise voltage regulator
(output noise< 10μVRMS) |
- |
Uses
the Texas Instruments high efficiency
step-Down
DC converter (up to 95%) |
- |
6V~26Vdc converted to 5.1V, 3A to power the Raspberry Pi |
- |
Uses the genuine ALPS RK163
series potentiometer for smooth volume adjustment |
- |
Built in high
quality IR sensor (Vishay
-the world's leading supplier of infrared receivers) |
- |
Onboard RCA connectors
|
- |
Onboard 3.5mm
stereo headphone jack |
- |
Onboard pluggable speaker & power screw
terminals |
- |
Onboard PH2.0 connector allowing
to connect a lighted power switch |
- |
Onboard gold-plated
high-current DC power jack (5.5x2.5mm) |
- |
Uses the
digital I2S audio signals to reduce CPU load over
USB audio solutions |
- |
Connects
directly to the Raspberry Pi - No
wiring required |
- |
Powers the
Raspberry Pi - no additional power supply |
- |
Reserved Raspberry Pi GPIO pin
header (2x13Pins) |
- |
Pop-noise can be improved by
enabling GPIO control |
- |
AMP can be
enabled / disabled with jumper link |
|
|
|
X400
V3.0 ALUMINUM METAL ENCLOSURE |
- |
Ultra-compact aluminum chassis |
- |
All ports
and slots of the case can match with Raspberry Pi
and X400 perfectly |
- |
Exhaust
holes surface can reach
perfect heat dissipation |
- |
Equipped with 19mm metal
latching power switch |
- |
Equipped with high quality
solid aluminum potentiometer Knob |
- |
Raspberry
Pi status LEDs still visible |
- |
Easy to
change the Raspberry Pi OS SD card - No need to open
the case |
|
|